SNR R183.03 wheel bearings

rb max.:2 mm; C:30 mm; a:33.228 mm; Reference speed:3600 r/min; D:150 mm; B:36 mm; r3,4 min.:2 mm; Ca min.:5 mm; Basic dynamic load rating C:263 kN; Calculation factor Y:1.4;

Fatigue load limit Pu:500 kN; da min.:398 mm; Da max.:502 mm; rb max.:3 mm; D:520 mm; Calculation factor kr:0.25; Mass bearing:91.5 kg; D1 ≈:469 mm; s max.:7 mm; b1:9.4 mm;

Fillet Radius rb:1.00 mm; B:28.00 mm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:156000 N; Grease Speed Rating n1:2600 rpm; Oil Speed Rating n2:3200 rpm; d:160.000 mm; Basic Dynamic Radial Load Rating C:127000 N; D:220.0000 mm;

B4:27 mm; Lock washer:W 28; d3 max.:180.315 mm; d:140 mm; Mass adapter sleeve assembly:4.75 kg; Sleeve:S 28x5; G:139.624 mm; Lock nut:AN 28; Hydraulic nut:HMVC 28E; d1:127 mm;

Cap bolt, SAE grade:8; Cap bolt recommended tightening torque:515.2 N·m; P180°:54.3 kN; L:393.7 mm; Mass pillow block:44 kg; Da:190 mm; P150°:44.5 kN; R1:73.025 mm; Bearing:22318 EK; da:82.55 mm;

P180°:30.2 kN; Max. speed for Taconite seal:1250 r/min; Housing:SAF 515; A2:193.675 mm; Bearing:22215 EK; Initial grease fill:68.04 g; End plug (suffix Y):EPR 7; R1:46.038 mm; L:285.75 mm; H:157.559 mm;

Mass needle roller and cage assembly:0.039 kg; Ew:40 mm; Basic static load rating C0:49 kN; Limiting speed:13000 r/min; Fatigue load limit Pu:6 kN; Reference speed:12000 r/min; U:27 mm; Basic dynamic load rating C:23.8 kN; Fw:35 mm;

Basic Static Radial Load Rating Co:60000 N; D:130.0000 mm; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:71500 N; d:75.000 mm; Grease Speed Rating n1:4000 rpm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:5300 rpm; B:25.00 mm;

D:170.0000 mm; Basic Dynamic Radial Load Rating C:133000 N; Basic Static Radial Load Rating Co:118000 N; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:8300 rpm; Oil Speed Rating n2:12000 rpm; B:32.00 mm; d:95.000 mm; Fillet Radius ra:2.00 mm;

B2:355 mm; Nut for removal:HM 30/950; Hydraulic nut:HMV 190 E; Mass withdrawal sleeve:250 kg; G:Tr 950x8; d:900 mm; B1:335 mm; d1:850 mm; A:15 mm; G1:55 mm;

Accessories:No Shield, no Seal,; Basic Dynamic Radial Load Rating C:70200 N; D:110.0000 mm; Oil Speed Rating n2:5000 rpm; Basic Static Radial Load Rating Co:58500 N; B:38.10 mm; Sealed Speed Rating n3:3800 rpm; d:60.000 mm; Grease Speed Rating n1:3800 rpm; Fillet Radius ra:1.50 mm;

B:10 mm; Permissible sliding velocity v max.:0.5 m/s; Specific dynamic load factor K:25 N/mm²; Tolerance housing:H7; Tolerance shaft:e7; d:5 mm; Mass bushing:0.005 kg; Coefficient of friction µ min.:0.08; Specific static load factor K0:45 N/mm²; D:10 mm;

d:12.000 mm; Sealed Speed Rating n3:17000 rpm; Basic Static Radial Load Rating Co:2360 N; Oil Speed Rating Open/Shielded n2:32000 rpm; D:28.0000 mm; Grease Speed Rating Open/Shielded n1:26000 rpm; B:8.00 mm; Fillet Radius ra:0.30 mm; Basic Dynamic Radial Load Rating C:5070 N; Accessories:One Seal;

C:32 mm; da:41.4 mm; Mass bearing:0.16 kg; Basic dynamic load rating C:40.2 kN; ra max.:0.3 mm; Reference speed:11000 r/min; D:47 mm; Db:35.6 mm; Fatigue load limit Pu:9 kN; E:42 mm;

A2:165.1 mm; H1:125.425 mm; Mass pillow block:51.7 kg; S:4.763 mm; Initial grease fill:481.95 g; Ca:62.789 mm; End plug (suffix Y):EPR 14; P60°:178 kN; Eye bolt:3/8-16 UNC; Cap bolt, SAE grade:8;